Makita 4304 Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Alat Listrik Makita 4304. Makita 4304 8 halaman. Variable speed
Juga untuk Makita 4304: Buku Petunjuk (20 halaman)

Halaman Cetak

SPECIFICATIONS

Model

Length of stroke .................................................................................. 26 mm

Cutting capacities

Wood ................................................................................................ 135 mm

Mild steel .......................................................................................... 10 mm

Aluminum ......................................................................................... 20 mm

Stroke per minute................................................................................ 500 – 3,000

Overall length ...................................................................................... 249 mm

Net weight ........................................................................................... 2.3 kg

• Due to our continuing programme of research and development, the specifications herein are subject to change with-

out notice.

• Note: Specifications may differ from country to country.

Power supply

The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only

be operated on single-phase AC supply. They are double-insulated in accordance with European Standard and can,

therefore, also be used from sockets without earth wire.

For European countries only

Noise and Vibration

The typical A-weighted noise levels are

sound pressure level: 88 dB (A)

sound power level: 99 dB (A)

Uncertainty is 3 dB (A).

– Wear ear protection. –

The typical weighted root mean square acceleration

value is 4 m/s

These values have been obtained according to

EN60745.

EC-DECLARATION OF CONFORMITY

We declare under our sole responsibility that this product

is in compliance with the following standards of standard-

ized documents,

EN60745, EN55014, EN61000

in accordance with Council Directives, 89/336/EEC and

98/37/EC.

Yasuhiko Kanzaki

MAKITA INTERNATIONAL EUROPE LTD.

Michigan Drive, Tongwell, Milton Keynes,

Bucks MK15 8JD, ENGLAND

Responsible manufacturer:

Makita Corporation Anjo Aichi Japan

ENG006-2-V4

CE 2005

Director

ENH101-5

4304

4305

26 mm

135 mm

10 mm

20 mm

500 – 3,000

285 mm

2.3 kg