CORNING PC-400D Buku Petunjuk - Halaman 5

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Peralatan Laboratorium CORNING PC-400D. CORNING PC-400D 14 halaman. Digital hot plates, stirring hot plates, stirrers, and external temperature controller
Juga untuk CORNING PC-400D: Buku Petunjuk (11 halaman), Buku Petunjuk (8 halaman), Buku Petunjuk (14 halaman)

Halaman Cetak

3.0 Product Controls and Indicators

1. Power Indicator: Illuminates at all times when the product is properly connected to input power.

2. Stir Control Knob: Turn the knob all the way counterclockwise to turn off stirring function.

Turn the knob clockwise to set desired stirring speed.

3. Stirring Speed Display: Shows the speed set for stirring.

4. Heat Control Knob: Turn the knob all the way counterclockwise to turn off heating

function. Turn the knob clockwise to set the desired heating temperature.

5. Heating Temperature Display: Shows the temperature set for heating.

6. Hot Top Indicator: Illuminates when the temperature of the top is too hot to touch

(greater than approx. 60°C).

7. Temperature Probe In-Use Indicator: Illuminates when the external temperature probe

is connected to the unit.

4.0 Product Connections

1. Power Cord Input: Connect the supplied power cord into this connector.

2. External Temperature Controller Input: Connect the optional External Temperature

Controller (Cat. No. 6795PR) into this connector.

To Connect/Disconnect the External Temperature Controller

1. Turn the Stir Control Knob and Heat Control Knob to the OFF position.

2. Disconnect power cord.

3. Insert/remove external temperature controller connector into/from the input connector.

4. Reconnect power cord.

5. Product is now ready for use.

Instruction Manual