Makita 4327M Buku Petunjuk - Halaman 9
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Listrik Makita 4327M. Makita 4327M 13 halaman. Jig saw
Juga untuk Makita 4327M: Spesifikasi (2 halaman), Informasi Teknis (7 halaman)
Halaman Cetak
Rip fence (optional accessory)
CAUTION:
•
Always be sure that the tool is switched off
and unplugged before installing or removing
accessories.
1. Straight cuts
Steel base type
1. Rip fence (Guide rule)
When repeatedly cutting widths of 160 mm or less, use
of the rip fence will assure fast, clean, straight cuts.
Aluminum base type
1. Rip fence (Guide rule)
To install, insert the rip fence into the rectangular
hole on the side of the base with the fence guide
facing down. Slide the rip fence to the desired cut-
ting width position, then tighten the bolt to secure it.
3
1. Hex wrench 2. Bolt 3. Rip fence (Guide rule) 4. Guide
facing
1
Steel base type
1
4
2
1
2
1. Bolt 2. Fence guide 3. Hex wrench 4. Rip fence
(Guide rule)
2. Circular cuts
1
1. Treaded knob 2. Guide facing 3. Rip fence (Guide
rule) 4. Pin
4
1. Threaded knob 2. Pin 3. Rip fence (Guide rule)
4. Fence guide
9 ENGLISH
Aluminum base type
Steel base type
1
2
3
4
Aluminum base type
3
4
1
2
3