Makita 4340CT Informasi Teknis - Halaman 6

Jelajahi secara online atau unduh pdf Informasi Teknis untuk Alat Listrik Makita 4340CT. Makita 4340CT 16 halaman. Jig saw
Juga untuk Makita 4340CT: Buku Petunjuk (17 halaman), Spesifikasi (2 halaman), Buku Petunjuk (13 halaman)

Halaman Cetak

epair

3. Align the hole of slider and the same of rod, and insert pin 4 into the aligned holes from left side as illustrated

in Fig. 9.

Stand slider and insert a pair of linear guide as illustrated in Fig. 9A.

4. Lifting up leaf spring, lay a pair of linear guide in order to position leaf spring on linear guides as illustrated

in Fig. 10.

And push slider to the center of linear guides. Fasten linear guides with 4 pcs. of pan head screws

M4 x 10 as illusdtrated in Fig. 10A.

Push slider to the

center of linear guides.

5. Assemble stop ring E-3 to pin 4 as illustrated in Fig. 11.

Check, whether slider can reciprocate on linear guide smoothly, or not.

If slider does not reciprocate smoothly, incorrectly assembled linear guides can interfere with slider

in reciprocating. Try again to assemble linear guides correctly.

Linear guide

Rod inserted into

gear housing cover

Slider

Fig. 9

Lay linear guides.

Lift up leaf spring.

Pan head screws M4x10

Slider

Pin 4

Rod

Slider, stood for setting

a pair of linear guide

Slider

Rod

Pin 4

(Insert it from left side.)

Linear guide

Fig. 10

Fig. 10A

Stop ring E-3

Fig. 11

P 6 / 16

Linear guides

Rod

Slider

Fig. 9A

Slider

Leaf spring