CORNING PSU6 Panduan Instalasi Cepat - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Perangkat Keras Jaringan CORNING PSU6. CORNING PSU6 13 halaman. Head end equipment

Halaman Cetak
CORNING PSU6 Panduan Instalasi Cepat
ONE SD-LAN Head
End Equipment
Quick Installation Guide
SD-LAN-000-HEEQUIP
8 Fiber Set Up |
8.1 Fiber Hardware Housing Set Up
Step 1
Mount selected fiber hardware
enclosure in Head End equipment
rack
CCH-04U
8 CCH Panels/Cassettes
CCH-03U
6 CCH Panels/Cassettes
CCH-02U
4 CCH Panels/Cassettes
CCH-01U
2 CCH Panels/Cassettes
Step 2
Insert selected fiber panels or
cassettes into housing
NOTE: Outgoing fiber cables can be terminated using
the following methods
A. Unicam® Connectors
B. Fuselite® Connectors
C. CCH Pigtailed Splice Cassettes
METHOD A. Unicam® Connector
Step 1
Use CCH panels to interconnect
Head Equipment and outgoing fiber
cables
Step 2
Insert CCH panels into fiber housing
Qucik Installation I SD-LAN-000-HEEQUIP
Step 3
Terminate outgoing fiber using
Corning Unicam® standard
recommended procedure
(https://www.corning.com/
catalog/coc/documents/standard-
recommended-procedures/006-369.
pdf)
Step 4
Plug terminated Unicam connectors
into the back of the CCH panels
Step 5
Route fiber in back of CCH housing
making sure the minimum bend
radius is not exceeded and
fibers are not pinched or damaged
Step 6
Make sure outgoing cables are
routed and strain relieved properly to
housing
Step 7
Connect jumpers from Head End
Active equipment to the appropriate
port on CCH panels
METHOD B. Fuselite® Connector
Step 1
Use CCH panels to interconnect
Head Equipment and outgoing fiber
cables
Step 2
Insert CCH panels into fiber housing
Step 3
Terminate fiber using Corning
Fuselite® standard recommended
procedure
(https://www.corning.com/
catalog/coc/documents/standard-
recommended-procedures/LAN-
1468-AEN.pdf)
Step 4
Plug terminated Fuselite®
connectors into the back of the CCH
panels
Step 5
Route fiber in back of CCH housing
making sure the minimum bend
radius is not exceeded and
fibers are not pinched or damaged
| Page 12