Makita 4350FCT Informasi Teknis - Halaman 13

Jelajahi secara online atau unduh pdf Informasi Teknis untuk Alat Listrik Makita 4350FCT. Makita 4350FCT 14 halaman. Jig saw
Juga untuk Makita 4350FCT: Spesifikasi (2 halaman), Perincian Bagian (3 halaman), Buku Petunjuk (13 halaman), Buku Petunjuk (13 halaman), Buku Petunjuk (13 halaman)

Halaman Cetak

iring

Rear side of Motor housing

Route Field lead wires (black and white) and Earth lead wire (transparent)

for Noise suppressor as illustrated in Figs. D-2 and D-3.

Put each lead wire into Lead wire holders.

Do not slack the lead wire from rear side of Motor housing to inside of Handle.

Fig. D-2

Lead wire holders of Motor housing

Inside of Handle for model with Controller

Route Lead wires to the inside of Pins

Pins

Controller (if used)

Put Controller lead wire

(brief sized one) with tube

in this space. (if used)

Noise suppressor

(if used)

Closed end splice

2-SD

Pick-up coil

Brush holder

Route Lead wires

between rib and wall

Fig. D-3

Lead wire holders of

Motor housing

Brush holder

Installation hole

for Earth lead wire

Put LED lead wire into

lead wire holder.

Terminal

black (if used)

Field lead wire (black)

Field lead wires (black)

Earth lead wire

(transparent): if used

Put the slack of LED lead wire

in this space.

Switch

LED (if used)

Route Lead wire

between boss and wall.

Field lead wire (white)

P 13 / 14

Field lead wire

(white)