Makita 4351FCT Buku Petunjuk - Halaman 2
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Listrik Makita 4351FCT. Makita 4351FCT 13 halaman. Jig saw
Juga untuk Makita 4351FCT: Spesifikasi (2 halaman), Perincian Bagian (3 halaman), Buku Petunjuk (13 halaman), Buku Petunjuk (9 halaman), Informasi Teknis (15 halaman)
Halaman Cetak
ENGLISH
SPECIFICATIONS
Length of stroke
Max. cutting capacities
Strokes per minute (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
Model
Wood
Steel
Aluminum
-1
)
Overall length
Net weight
Safety class
equipment
and
environmentally
compatible
4351T
26 mm
135 mm
10 mm
20 mm
2,800
271 mm
2.4 kg
END201-2
For Model 4351T
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-11:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 85 dB (A).
Vibration
The
vibration
determined according to EN60745-2-11:
its
Work mode : cutting chipboard
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : cutting sheet metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
For Model 4351CT, 4351FCT
ENE019-1
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-11:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
ENF002-1
The noise level under working may exceed 85 dB (A).
Vibration
The
vibration
determined according to EN60745-2-11:
Work mode : cutting chipboard
Vibration emission (a
Uncertainty (K) : 1.5 m/s
2
4351CT
26 mm
135 mm
10 mm
20 mm
800 - 2,800
271 mm
2.5 kg
/II
) : 85 dB(A)
pA
Wear ear protection.
total
value
(tri-axial
2
) : 7 m/s
h,CW
2
) : 4.5 m/s
h,CM
2
) : 85 dB(A)
pA
Wear ear protection.
total
value
(tri-axial
) : 6.5 m/s
h,CW
2
4351FCT
26 mm
135 mm
10 mm
20 mm
800 - 2,800
271 mm
2.5 kg
ENG101-1
ENG220-1
vector
sum)
ENG304-1
2
ENG101-1
ENG220-1
vector
sum)
2