Makita 4351T Informasi Teknis - Halaman 3

Jelajahi secara online atau unduh pdf Informasi Teknis untuk Alat Listrik Makita 4351T. Makita 4351T 15 halaman. Jig saw
Juga untuk Makita 4351T: Spesifikasi (2 halaman), Buku Petunjuk (13 halaman), Buku Petunjuk (13 halaman), Buku Petunjuk (9 halaman)

Halaman Cetak

epair

[2] Disassembling Tool opener

1. Remove M5x18 Hex socket head bolt. Base is separated from product. (Fig. 1)

2. Remove M4 + Pan head screw. Tool opener and Torsion spring 6 are separated. (Fig. 2)

Fig. 1

[3] Assembling tool opener

1. Install Torsion spring 6 into the depression on Gear housing cover around Tool opener hinge portion, and then fasten

Tool opener to Gear housing cover with M4 + Pan head screw.

2. Turn the tail of Torsion spring 6 clockwise using thin flat screwdriver to set it in place. (FIg. 3)

Fig. 3

Viewed from Blade holder side

Gear housing

Blade holder

[4] Disassembling Head cover section

1. Separate Head cover R from Head cover L by the following steps.

(1) Removing two 4x40 Tapping screws and a 4x50 Tapping screw. (Fig. 4)

(2) Gently lift up the specific area around the hole for 4x50 Tapping screw (designated in gray color in Fig. 4) with

slotted screwdriver in order to remove the hooks of head covers R and L from the nottches of Motor housing. (Fig. 5)

Note: Take care not to break the hooks, the protrusion and the depressions when disassembling.

2. LED circuit (only for 4351FCT) and Safety wire can be removed together. As for removal of Safety wire, open Tool

opener and remove both tails of Safety wire from the holes of Gear housing cover behind Head covers L and R.

Fig. 4

Tapping

screws 4x40

Tapping

screw 4x50

Lift up this area with

slotted screwdriver.

Base

Hex socket head bolt M5x18

Tool opener

The tail of

torsion spring 6

Gear housing cover

Safety wire

Tool opener

Fig. 2

Tool opener hinge portion

Fig. 5

Safety wire

Depression for

Head cover L's hook

Hook

Protrusion

Torsion spring 6

Tool opener

+ Pan head screw M4

Hook

Depression

for Head

cover L's

protrusion

Depression for Head cover R's hook

P 3 / 15