HIKVISION DS-7216HUHI-K2(S) Panduan Memulai Cepat - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk DVR HIKVISION DS-7216HUHI-K2(S). HIKVISION DS-7216HUHI-K2(S) 17 halaman.

3.7 Add IP Cameras

Purpose

Add the network cameras to the connection list of the device before getting live video or recording videos.

Before you start

Ensure the network connection is valid and correct, and the IP camera to add has already been activated. Please

refer to the User Manual for activating the inactive IP camera.

Step 1 Click

on the main menu bar.

Step 2 Click Custom Add on the title bar.

Step 3 Enter IP address, protocol, management port,

and other information of the IP camera to add.

Step 4 Enter the login user name and password of the

IP camera.

Step 5 Click Add.

3.8 Connect PoC Cameras

Before you start

 Ensure your device supports PoC (Power over Coaxitron) cameras connection.

 Connect the PoC camera to the DVR.

Purpose

Some models support PoC (Power over Coaxitron) cameras connection. DVR will detect the connected PoC

cameras automatically, manage the power consumption via the coaxial communication, and provide power to

the cameras via coaxitron.

Step 1 Go to Camera > Camera > PoC Status.

Step 2 Turn on the PoC for the channel(s) as your desire.

Step 3 Check the status of connected PoC camera.

 If the power consumption of the DVR is lower than that of AF camera, when AF or AT camera is connected,

there is no video and "Insufficient Power for PoC" is overlaid on the live view image.

 If the power consumption of the DVR is higher than that of the AF camera and lower than that of the AT

camera, when AF camera is connected, it is powered on normally; when AT camera is connected, it is

Digital Video Recorder Quick Start Guide

Figure 3-6 Add IP Camera