Avantes AvaLight-CAL-NEON-MINI Manual - Halaman 10

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Pencahayaan Avantes AvaLight-CAL-NEON-MINI. Avantes AvaLight-CAL-NEON-MINI 12 halaman.

5. Disconnect the connector of the bulb.

6. Remove the screw of the bulb holder (Torx T10)

7. Remove the light bulb.

8. Place the new light bulb in the bulb holder; WARNING: do not touch the glass with your

fingers.

9. Put back the screw for the bulb holder.

10. Reconnect the connector of the bulb into the connector of the PCB.

11. Slide back the front plate with mount plate (bulb holder with PCB) into the housing of the

light source. Be careful not to pinch the electrical wires.

12. Put back the 2 screws in the front and protection caps.

Revision: 2-00

Screw bulb

holder

www.avantes.com