Avantes AvaLight-D-S Manual - Halaman 8

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Pencahayaan Avantes AvaLight-D-S. Avantes AvaLight-D-S 12 halaman.

3 Replacement of Deuterium or Halogen Lamp

Warning:

Make sure the Deuterium Lamp is switched OFF before disconnecting the power cord.

Before re-connecting the power cord, make sure that the power switch, the Deuterium lamp and

the Halogen lamp switch are switched off.

Warning:

During operation the lamp envelope reaches a temperature of approx. 250°C. Should you intend to

change the lamp please wait for at least 20 minutes for cooling before touching the lamp. The lamp

envelope (quartz glass) should not be touched with bare fingers, otherwise lifetime will be severely

reduced.

Please follow these instructions for the bulb replacement:

1. Switch off the light source and disconnect the unit from the mains power supply.

2. Remove both side covers by unclicking.

3. Remove the 4 screws securing the top cover by using a torx screwdriver to remove the top

cover.

4. Disconnect the deuterium power connector.

5. Dismount the front panel by unscrewing the 4 front screws.

6. Carefully slide out the front panel until the green connector is visible and disconnect the

connector of the switches.

Deuterium

connector

7. Turn the light source upside down and carefully slide out the front panel.

Revision: 1-00

Switch

connector

www.avantes.com