Avantes AVASPHERE-50-LS-HAL-12V Panduan Pengoperasian dan Pemasangan - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengoperasian dan Pemasangan untuk Peralatan Pencahayaan Avantes AVASPHERE-50-LS-HAL-12V. Avantes AVASPHERE-50-LS-HAL-12V 14 halaman. Light sources

Halaman Cetak

3. Changing the light source bulb

1) Disconnect the power cable from the connector.

2) Disconnect the interface cable from the connector (if connected).

3) Remove the 3 torx screws on top with a torx screwdriver (Torx T10).

4) Remove the top from the AvaSphere-50-LS-HAL-12V.

5) Remove the 2 torx screws located next to the bulb with a torx screwdriver (Torx T10).

Revision: 2-00

www.avantes.com

[email protected]