Makita 6823 Buku Petunjuk - Halaman 7

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Listrik Makita 6823. Makita 6823 17 halaman. Drywall screwdriver
Juga untuk Makita 6823: Perincian Bagian (3 halaman), Buku Petunjuk (8 halaman), Buku Petunjuk (8 halaman), Buku Petunjuk (7 halaman), Buku Petunjuk (10 halaman), Informasi Teknis (10 halaman), Buku Petunjuk (12 halaman)

1. Reversing switch lever

1. Hook

For continuous operation, pull the switch trigger and then

push in the lock button.

To stop the tool from the locked position, pull the switch trig-

ger fully, then release it.

NOTE:

•

Even with the switch on and motor running, the bit will

not rotate until you fit the point of the bit in the screw

head and apply forward pressure to engage the clutch.

Reversing switch action

002635

This tool has a reversing switch to change the direction of

rotation. Move the reversing switch lever to the

(A side) for clockwise rotation or the

counterclockwise rotation.

CAUTION:

•

Always check the direction of rotation before operation.

•

Use the reversing switch only after the tool comes to a

complete stop. Changing the direction of rotation before

the tool stops may damage the tool.

Hook

002644

The hook is convenient for temporarily hanging the tool.

When using the hook, pull it out in A direction and then push

it in B direction to secure in place.

When not using the hook, return it back to its initial position

by following the above procedures in reverse.

002645

position

position (B side) for