Jameco Electronics 2193838 Manual - Halaman 6

Jelajahi secara online atau unduh pdf Manual untuk Permainan Jameco Electronics 2193838. Jameco Electronics 2193838 10 halaman.

Step 15 - Prepare the wires

Fit the heat shrink tubing in each wire and prepare the wires with little tin.

Step 16 - Solder the RGB led

Solder every wire from #step 15 with RGB led pins.

Step 17 - Insulate RGB led pins

Warm the heat shrink tubing with lighter. Once you have already placed over the pins.

Step 18 - Connect every led to board

Follow the schematic diagram in conjunction with the pins of led (1.BLUE,2.COMMON,3.RED,4.GREEN). Take a look at the data

sheet in address http://www.jameco.com/Jameco/Products/ProdDS/2128500.pdf and use the marked wire (#step14).