Makita 7104L Buku Petunjuk - Halaman 2

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Listrik Makita 7104L. Makita 7104L 13 halaman. 12-1/4" planer, blade sharpener, plate joiner, chain mortiser, blower, heat gun
Juga untuk Makita 7104L: Manual Suku Cadang (4 halaman), Brosur (1 halaman), Informasi Teknis (8 halaman), Buku Petunjuk (13 halaman)

Halaman Cetak

SPECIFICATIONS

Capacities

Width of applicable workpiece

Chain speed (min

Dimensions (L × W × H)

• Due to our continuing programme of research and development, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

Symbols

The following show the symbols used for the tool. Be

sure that you understand their meaning before use.

..................Only for EU countries

Do not dispose of electric equipment

together with household waste mate-

rial!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its imple-

mentation in accordance with

national law, electric equipment that

have reached the end of their life

must be collected separately and

returned to an environmentally com-

patible recycling facility.

Intended use

The tool is intended for cutting mortise in wood.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. This

tool should be grounded while in use to protect the oper-

ator from electric shock. Use only three-wire extension

cords which have three-prong grounding-type plugs and

three-pole receptacles which accept the tool's plug.

Model

Max. hole length (Longitudinal)

Max. hole depth

-1

)

Net weight

Safety class

END001-1

For European countries only

Noise and Vibration

The typical A-weighted noise levels are

sound pressure level: 90 dB (A)

sound power level: 103 dB (A)

– Wear ear protection. –

The typical weighted root mean square acceleration

value is not more than 2.5 m/s

These values have been obtained according to

EN61029.

EC-DECLARATION OF CONFORMITY

We declare under our sole responsibility that this product

is in compliance with the following standards of stand-

ardized documents, EN61029, EN55014, EN61000 in

accordance with Council Directives, 73/23/EEC, 89/336/

EEC, 98/37/EC.

MAKITA INTERNATIONAL EUROPE LTD.

Michigan Drive, Tongwell, Milton Keynes, Bucks MK15

8JD, ENGLAND

Responsible manufacturer:

Makita Corporation Anjo Aichi Japan

7104L

130 mm

155 mm

80 mm - 308 mm

300 m

512 mm × 298 mm × 513 mm

17 kg

Class I

Yasuhiko Kanzaki CE 2005

Director