Makita 9820-2 Buku Petunjuk - Halaman 5

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Listrik Makita 9820-2. Makita 9820-2 17 halaman. 200 mm (7-7/8") sharpener
Juga untuk Makita 9820-2: Brosur (1 halaman), Buku Petunjuk (8 halaman)

Makita 9820-2 Buku Petunjuk
ADDITIONAL SAFETY RULES
1.
Use only wheels having a maximum operating speed at least as high as
"No
2. Check the wheel carefully for cracks or damage before operation. Replace
3.
Secure the wheel carefully.
4. Be careful not t o damage the spindle or the bolt, or the wheel itself might
5. Keep a space of 5 m m (3/16") between the sharpening platform guide (rail)
6.
Keep hands away from rotating parts.
7. Make sure the workpiece is not contacting the wheel before the switch is
turned on.
8.
Before using the tool on an actual workpiece, let
it
run for several minutes.
Watch for flutter that might be caused by incorrect installation or a poorly
balanced wheel.
Load RPM" marked on the tool's nameplate.
cracked or damaged wheel immediately.
break.
and the grinding wheel.
9.
Use the upper surface of the wheel only. Don't use the side surface.
10. If the wheel stops during operation, makes an odd noise
o r
begins t o vibrate,
11. Always switch off and wait for the wheel t o come t o a complete stop be-
12.
Do not touch the workpiece immediately after operation,
it
may be extremely
13.
Dry the wheel by idling the tool after operation t o prevent the wheel from
14. Store wheels in a dry location only.
switch off the tool immediately.
fore adjustment or inspection.
hot and could burn your skin.
freezing in cold weather. Freezing can crack the wheel.
SAVE THESE INSTRUCTIONS.
WARNING
For Your Own Safety Read Instruction
Manual Before Operating Grinder
1. Wear eye protection.
2. Use grinding wheel suitable for speed of grinder.
3.
Replace cracked wheel immediately.
4. Always use guards and eye shields.
5.
Do not overtighten wheel nut.
6. Use only flanges furnished with the grinder.
5