KitchenAid W10579120A Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin pencuci piring KitchenAid W10579120A. KitchenAid W10579120A 17 halaman.

Halaman Cetak

Add Rinse Aid

Your dishwasher is designed to use rinse aid for good drying

performance. Without rinse aid, your dishes and dishwasher interior

will have excessive moisture. The heat dry option will not perform

as well without rinse aid.

Rinse aid keeps water from forming droplets that can

dry as spots or streaks. It also improves drying by

allowing water to drain off of dishes after final rinse.

To add rinse aid, turn the

dispenser cap to "Refill" and lift

off. Pour rinse aid into the

opening until indicator level is at

"Full." Replace dispenser cap

and turn to "Lock." Make sure

cap is fully locked.

NOTE: For most water conditions,

the factory setting will give good

results.

Check water hardness level to ensure no rings

or spots on your dishware before adding rinse

aid or adjusting the factory setting.

If you are experiencing poor drying

performance, you may want to try a higher

setting.

Turn the arrow adjuster inside the dispenser to

change rinse aid setting.

This information covers several different models. Your dishwasher may not have all of the cycles and options described.

The most advanced and versatile cycle. ProWash™ cycle

senses the load size, soil amount, and toughness of soil, to

adjust the cycle for optimal cleaning using only the amount of

water and energy needed.

Use for hard-to-clean, heavily soiled pots, pans, casseroles,

and regular tableware.

This cycle is recommended to completely wash a full load of

normally soiled dishes. Selecting this cycle will default to the

options recommended for normal amounts of food soil. The

energy label is based on this cycle.

Use for lightly soiled items or china and crystal.

When you need fast results, the Express Wash will clean

dishes using slightly more water and energy. Select the Heat

Dry or ProDry™ option to speed drying times.

Use for rinsing dishes, glasses, and silverware that will not be

washed right away.

Do not use detergent.

RINSE AID

IMPROVES DRYING

Full

Lock

Add

CHECK

WITH DOOR

FULLY OPEN

CYCLE GUIDE

CYCLES

Select a Cycle (cycles vary by model)

Efficient dishwashers run longer to save water and energy, just as

driving a car slower saves on gas. Typical cycle time is approximately

2¹⁄₂ hours, but can take less or more time to complete depending on

selections.

Full

Select Options (options vary by model)

You can customize your cycles by pressing the options desired. If you

Add

change your mind, press the option again to turn off the option. Not all

options are available for every cycle. If an invalid option is selected for a

given cycle, the lights will flash.

Start or Resume a Cycle

NOTE: Run hot water at sink nearest your dishwasher until water is hot.

Turn off water.

If Start/Resume button is located on top of door, push door firmly

closed within 3 seconds of pressing START/RESUME. If door is not

closed within 3 seconds, the Start button LED will flash, an audible

tone will be heard, and cycle will not start.

IMPORTANT: If anyone opens the door (such as, for adding a dish,

even during the Delay Hours option), Start/Resume button must be

pressed each time.

If Start/Resume button is located on front of door, push door firmly

closed. The door latches automatically. Select the wash cycle,

options and press START/RESUME or press START/RESUME to

repeat the same cycle and options as in previous wash cycle.

SOIL LEVEL

Light to Medium

Tough/Baked-On

Heavy

Heavy/Baked-On

Light

Medium

Heavy

Light to Medium

Heavy/Baked-On

All soil levels

WASH TIME* (MINS.)

W/O OPTIONS

TYPICAL

MAX

110

150

125

190

125

190

140

205

110

150

110

150

125

190

105

145

120

185

WATER

USAGE

GALLONS

(LITERS)

3.8 (14.5)

5.0 (19.1)

7.7 (29.0)

7.9 (30.0)

2.8 (10.5)

4.0 (15.0)

7.9 (30.0)

4.2 (15.2)

7.7 (29.0)

6.2 (23.5)

2.4 (9.0)