Makita BCG180 Informasi Teknis - Halaman 6

Jelajahi secara online atau unduh pdf Informasi Teknis untuk Alat Listrik Makita BCG180. Makita BCG180 11 halaman. Cordless caulking gun
Juga untuk Makita BCG180: Buku Petunjuk (12 halaman)

Halaman Cetak

epair

[3] DISASSEMBLY/ASSEMBLY

[3] -2. Motor Complete, Gear Assembly (cont.)

ASSEMBLING

(1) Assemble Ball bearing 6803LLU to Gear housing. Refer to the drawing on the left in Fig. 7.

(2) Mount Ball bearing 6806LLU to Spur gear 10. Refer to the drawing on the bottom in Fig. 6.

(3) Assemble the Spur gear 10 section to Gear housing. Refer to the drawing on the upper right in Fig. 6.

(4) Mount Oil seal 30 to Spacer. Refer to the drawing on the bottom in Fig. 5.

(5) Assemble Plate 23, Spacer, Internal gear 48 and Spur gear 9C complete to Gear housing as drawn in Fig. 8.

Fig. 8

Note: Assemble Spacer with the convex side

of it facing to Internal gear 48.

Spacer

Internal gear 48

(6) Assemble the parts on the Flat washer 5 side to Gear housing as drawn in Fig. 9.

Fig. 9

1. Set Carrier A complete on 1R027, and

assemble Carrier B and 9 pcs. of Pin 3.

< Note for Assembling of Pin 3 >

Do not lubricate on Pin 3.

And, be careful that Pin 3 easily falls off.

3. Assemble Spur gear 19B to the Pins of Carrier A complete.

And then, mount Flat washer 5 to Gear housing.

Flat washer 5

Spur gear 19B

( 3 pcs.)

Pins of Carrier

A complete

Oil seal 30

Plate 23

Pin 3 (9 pcs.)

Carrier B

Carrier A complete

1R027

Gear housing

Spur gear 9C

complete

2. While holding Internal gear 48

with your fingers, assemble Gear housing

to Carrier A complete section.

Gear housing

4. Assemble Stop ring E-4 to the shaft

on Spur gear 9C complete.

Spur gear 9C complete

Stop ring E-4

P 6/ 11