James Loudspeakers M1000 Panduan Pengguna - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penguat James Loudspeakers M1000. James Loudspeakers M1000 20 halaman. 1000w (4/8 ohm and 70v) dsp subwoofer amplifier
Halaman Cetak
MENU ITEM
Subsonic filter (Freq)
Subsonic filter (Slope)
EQ
Phase
Limiter
Delay Units
Delay
Display
Auto Off
Mode
Ext Trigger
Lock
Volume
DSP MENU TREE
START/NORMAL SCREEN
If LFE mode
If SUB mode
If EQ-1 to EQ-4 or default
Default Settings
Adjusts volume 0 to
Sets subsonic filter
Sets crossover
12 dB to 36 dB
Flat, User, EQ-1
EQ-2, EQ-3, EQ-4
If USER
Set Freq
20 – 125 Hz
0 to 315 Degrees
DEFAULT SETTING
20 Hz
24dB/octave
Flat
0 Degrees
0dB (off)
msec
0
On
15 Mins
SUB
Off
Off
-30dB
Navigation through the display menus is
Accomplished by the 5 button control pads on
-79 dB
from 16-40 Hz
If no button is pressed for 3 seconds,
the display reverts back to "normal".
Sets the crossover frequency
frequency
40-125 Hz (in SUB mode only)
40-125 Hz
Sets the slope of the crossover
Per octave
(in SUB mode only)
Select either Flat, USER EQ
which can be then adjusted by
the user, or 1 of 4 preset EQs
Set Level
+/- 6 dB
Set the Phase or best
summing to main speakers
the front panel of the M1000.
Select the third octave band
and then adjust the boost/cut
Page 13