Makita BHR241Z Informasi Teknis - Halaman 12

Jelajahi secara online atau unduh pdf Informasi Teknis untuk Alat Listrik Makita BHR241Z. Makita BHR241Z 14 halaman. Cordless combination hammer

epair

[3] DISASSEMBLY/ASSEMBLY

[3]-9. F/R change lever, Wave washer, Cushion and Rubber pin 5 in Housing set

ASSEMBLING

Refer to Fig. 47.

Fig. 47

Fit the protrusion of Switch into Oval hole of F/R

change lever and assemble them to Housing L.

protrusion of

Switch

Housing set (L)

Battery housing set (L)

Assemble Cushion to Battery

housing set (L) at the rear side of

Terminal.as illustrated above.

oval hole of

F/R change

lever

Terminal

Pass Pin 1.5 through Rubber pin 5.

And then, assemble them to Battery

housing set (L) as illustrated right.

See more at http://safe-manuals.com

P 12/ 14

Wave washer 15

Do not forget to put Wave

washer 15 in place for

holding Ball bearing

607DDW on the commutator

end of Armature.

Pin 1.5

Rubber pin 5