Makita BHS630 Informasi Teknis - Halaman 8

Jelajahi secara online atau unduh pdf Informasi Teknis untuk Alat Listrik Makita BHS630. Makita BHS630 16 halaman.
Juga untuk Makita BHS630: Buku Petunjuk (13 halaman)

Halaman Cetak

epair

[3] DISASSEMBLY/ASSEMBLY

[3]-5. LED and Motor Section

DISASSEMBLING

(3) Armature and Yoke unit can be replaced as drawn in Fig. 10.

Fig. 10

1. Remove Carbon brush and unscrew three M5x33

Pan head screws.

3. From Blade case section, Armature, Shaft lock and

Compression spring 6 are removed.

ASSEMBLING

(1) Assemble Yoke unit to Motor housing complete as illustrated in Fig. 11.

Fig. 11

Notch B

Motor housing

complete

(2) Assemble Motor section by tasking the reverse step of Disassembling. Refer to Fig. 10.

Note in Assembling:

Do not forget to assemble Shaft lock and Compression spring 6. Refer to the lower left drawing in Fig. 10.

Carbon brush

Armature

Shaft lock

Compression

spring 6

Notch A

2. Separate Blade case section from Motor housing complete.

M5x33 Pan

head screw

4. Disassemble Baffle plate and Yoke unit by unscrewing

two 4x65 Tapping screws.

Baffle plate

Yoke unit

Insert Yoke unit into Motor housing complete,

while aligning Notch A to Rib A.

So, Yoke unit is exactly mounted to Motor

housing complete, by fitting Notch B to Rib B.

Note in Assembling:

Notch A and Notch B are reversible.

Rib A

Rib B

P 8/ 16

Yoke unit

4x65 Tapping screw