Makita BJN161 Informasi Teknis - Halaman 6
Jelajahi secara online atau unduh pdf Informasi Teknis untuk Alat Listrik Makita BJN161. Makita BJN161 8 halaman. Cordless nibbler
Juga untuk Makita BJN161: Buku Petunjuk (13 halaman), Buku Petunjuk (11 halaman), Buku Petunjuk (13 halaman), Buku Petunjuk (12 halaman)
Halaman Cetak
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -4. Die and Punch
DISASSEMBLING
(1) Remove Lock nut with Wrench 32 by turning it counterclockwise. (See the left drawn in Fig. 2)
(2) Disassemble Die and Punch as drawn in Fig. 8.
Fig. 8
1 Pull off Die holder from Gear housing complete.
2 Remove Punch by loosening M5x8 Hex socket
set screw with Hex wrench.
2
Hex
Punch
wrench
Punch
holder
M5x8 Hex socket set screw
ASSEMBLING
Assemble Punch and Die holder as drawn in Fig. 9.
Fig. 9
1. Insert Punch into Punch holder until it stops
while aligning its concave portion with the screw
hole of Punch holder.
And tighten M5x8 Hex socket set screw.
concave for fitting the screw end
of M5x8 Hex socket set screw
screw hole of
Punch holder
1
Die holder
M5x8 Hex socket
set screw
3
M3x12 Hex socket
head screw (2 pcs.)
Die
3 Remove Die from Die holder
by unscrewing two M3x12
Hex socket head screws.
2. Assemble Die holder to Gear housing complete
while aligning the window of Die holder to
the stepped portion of Punch.
Punch
stepped portion of Punch
P 6/ 8
Die holder
window of Die holder