Gardasoft Vision PP860 Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengontrol Gardasoft Vision PP860. Gardasoft Vision PP860 17 halaman. Led lighting controller

Halaman Cetak

1. Serial Commands

Safety - English

3.1.1

PP860 – Safety

Please read this before using the PP860 family of products. If in doubt, contact

your distributor or Gardasoft Vision.

3.1.2

Heat

The PP860 can get very hot. It should be positioned where personnel cannot

accidentally touch it and away from flammable materials.

Do not exceed the power ratings given in the manual. Note that at the

maximum ratings the case temperature can reach 80

If the output load is short circuited then the heat dissipated within the unit will

greatly increase, resulting in a further rise in temperature.

3.1.3

Electrical

The user must ensure that the potential difference between any combination of

applied signals does not exceed the supply voltage. WARNING: Higher

voltages may cause a danger to personal health.

The PP860 does not have complete tracking isolation of inputs and outputs.

Transients caused by inductive loads must be suppressed external to the PP860.

3.1.4

General

The PP860 must not be used in an application where its failure could cause a

danger to personal health or damage to other equipment.