Avanti SBCA017G Buku Petunjuk - Halaman 5
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pendingin Anggur Avanti SBCA017G. Avanti SBCA017G 16 halaman. Superconductor refrigerator
Juga untuk Avanti SBCA017G: Daftar Bagian (2 halaman), Buku Petunjuk (16 halaman), Manual (4 halaman)
Halaman Cetak
Before the Beverage Cooler is used, it must be properly positioned and installed as
described in this manual,so read the manual carefully. To reduce the risk of fire,
electrical shock or injury when using the Beverage Cooler, follow basic precaution,
including the following:
Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and
do not use an extension cord.
It is recommended that a separate circuit, serving only your Beverage Cooler be provided. Use
receptacles that cannot be turned off by a switch or pull chain.
Never clean Beverage Cooler parts with flammable fluids. These fumes can create a fire hazard
or explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity
of this or any other appliance. The fumes can create a fire hazard or explosion.
Before proceeding with cleaning and maintenance operations, make sure the power line of the
unit is disconnected.
Do not connect or disconnect the electric plug when your hands are wet.
Unplug the Beverage Cooler or disconnect power before cleaning or servicing. Failure to do so
can result in electrical shock or death.
Do not attempt to repair or replace any part of your Beverage Cooler unless it is specifically
recommended in this manual. All other servicing should be referred to a qualified technician.
FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL
Use two or more people to move and install Beverage Cooler. Failure to do so can result in back
or other injury.
To ensure proper ventilation for your Beverage Cooler, the front of the unit must be completely
unobstructed. Choose a well-ventilated area with temperatures above 60°F (16°C) and below
90°F (32°C). This unit must be installed in an area protected from the element, such as wind, rain,
water spray or drips.
The Beverage Cooler should not be located next to ovens, grills or other sources of high heat.
The Beverage Cooler must be installed with all electrical connections in accordance with state
and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in
accordance with the National Electrical Code and local codes and ordinances is required.
Do not kink or pinch the power supply cord of Beverage Cooler.
The fuse (or circuit breaker) size should be 2.5 amperes.
It is important for the Beverage Cooler to be leveled in order to work properly. You may need to
make several adjustments to level it.
Never allow children to operate, play with or crawl inside the Beverage Cooler.
Do not use solvent-based cleaning agents of abrasives on the interior. These cleaners may
damage or discolor the interior.
Do not use this apparatus for other than its intended purpose.
IMPORTANT SAFEGUIDES
5