KitchenAid KERS205TBL0 Panduan Petunjuk Instalasi - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Rentang KitchenAid KERS205TBL0. KitchenAid KERS205TBL0 20 halaman. 30" (76 cm) freestanding electric ranges
Juga untuk KitchenAid KERS205TBL0: Daftar Bagian (7 halaman)
Halaman Cetak
4. Drill two 1/8"(3.0 mm) holes that correspond to the bracket
holes of the determined
mounting method. See below.
Floor Mounting
A
B
Wall Mounting
A. #12 x 1%" screws
B. Anti-tip bracket
A. #12 x 1%" screws
B. Anti-tip bracket
5. Using the Phillips screwdriver, mount anti-tip bracket to the
wall or floor with the two #12 x 1%" screws provided.
Power Supply
Cord
Direct Wire
Electrical
Shock Hazard
Disconnect
power before servicing.
Use a new 40 amp power supply cord.
Plug into a grounded
outlet.
Failure to follow these instructions can result in death,
fire, or electrical
shock.
Electricam Shock Hazard
Disconnect
power before servicing.
Use 8 gauge copper
or 6 gauge aluminum
wire.
Electrically
ground
range.
Failure to follow these instructions can result in death,
fire, or electrical
shock.
1. Disconnect
power.
2. Use Phillips screwdriver to remove the terminal block cover
screw located on the back of the range.
3. Remove plastic tag holding three 10-32 hex nuts from the
middle post of the terminal block.