Makita DA4030 Buku Petunjuk - Halaman 11
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Listrik Makita DA4030. Makita DA4030 13 halaman. Angle drill
Juga untuk Makita DA4030: Buku Petunjuk (17 halaman), Buku Petunjuk (8 halaman), Petunjuk Manual (10 halaman)
Halaman Cetak
MAINTENANCE
CAUTIO N :
Always be sure that the tool is switched
off
and unplugged before attempting to perform
inspection or maintenance.
Replacing carbon brushes
Remove and check the carbon brushes
regularly. Replace when they wear down to
the limit mark. Keep the carbon brushes
clean and free to slip
in
the holders. Both
carbon brushes should be replaced
at
the
same time. Use only identical carbon
brushes.
Use a screwdriver to remove the brush
1
holder caps.
Take
out the worn carbon
brushes, insert the new ones and secure
the brush holder caps.
I
Brush holder
cap
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjust-
ment should be performed by Makita Authorized or Factory Service Centers, always using
Makita replacement parts.
11