Makita DA4031 Buku Petunjuk - Halaman 8

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Listrik Makita DA4031. Makita DA4031 17 halaman. Angle drill
Juga untuk Makita DA4031: Perincian Bagian (3 halaman), Perincian Bagian (3 halaman), Buku Petunjuk (13 halaman), Buku Petunjuk (8 halaman), Petunjuk Manual (10 halaman)

Halaman Cetak

1. Mark

2. Motor housing

3. Lock button

4. Handle

ASSEMBLY

1. Side grip

change knob positioned halfway between the position 1

and the position 2, the tool may be damaged.

Torque limiter

For Model DA4031 only

The torque limiter will actuate when a certain torque level is

reached (for lower speed setting: position 1). The motor will

disengage from the output shaft. When this happens, the bit

will stop turning.

Switch handle mounting positions

003034

The switch handle can be rotated to either 90° left or right to

fit your work needs. First, unplug the tool. Press the lock but-

ton and rotate the switch handle until the

button is aligned with that on the motor housing. The switch

handle will be locked in that position.

CAUTION:

•

Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

Installing side grip (auxiliary handle)

003041

CAUTION:

•

Always be sure that the side grip is installed securely

before operation.

Screw the side grip on the tool securely. The side grip can be

installed on either side of the tool, whichever is convenient.

mark on the lock