Makita DCO140 Buku Petunjuk - Halaman 9

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Listrik Makita DCO140. Makita DCO140 13 halaman. Cordless cut-out tool
Juga untuk Makita DCO140: Buku Petunjuk (13 halaman), Informasi Teknis (8 halaman)

Halaman Cetak

Circular guide (optional accessory)

Circular cutting diameters: 10 cm - 34 cm

Installing circular guide

► 1. Thumb screw 2. Shoe

Release the thumb screw which secures the shoe.

► 1. Projections 2. Shoe

Align the projections in the circular guide with the

grooves in the shoe, and secure the shoe and circular

guide with the thumb screw.

► 1. Thumb screw 2. Circular guide 3. Shoe 4. Loosen

5. Tighten

To adjust the cutting depth, loose the thumb screw and

then slide the shoe with the circular guide. After the

proper adjustment, tighten the thumb screw securely.

Using circular guide

► 1. Knob 2. Tighten 3. Loosen

Loosen the knob, and adjust its position in accordance

with the size of the circle to be cut. (The hole dimen-

sions to be cut are indicated on the side of the circular

guide as a general guideline.) After completion of the

adjustment, tighten the knob securely.

► 1. Knob

Install the end of the knob into the center of the circle to

be cut, and proceed to cut in a clockwise direction.

Vacuum cover (optional accessory)

To perform cleaner operations, use the vacuum cover

and connect the tool to Makita vacuum cleaner or dust

collector.

► 1. Thumb screw 2. Vacuum cover

9 ENGLISH