Garden GP03 Instalasi dan Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Instalasi dan Panduan Pengguna untuk Pompa Air Garden GP03. Garden GP03 16 halaman. Swimming pool heat pump

２２２２．．．． Trial

A． Please start the pump before the heat pump and turn it off after the heat

pump, so there is water running through the system throughout operation

hours.

B．The user should start the pump, making sure the water pressure is correct;

set the desired temperature on the thermostat, and then switch on the power

supply.

C．In order to protect the swimming pool heater, the Heat Pump is equipped

with a time lag starting function, when starting the Heat Pump, the blower

will run 1 minute before the compressor;

D．After the swimming pool heater starts up, check for any abnormal noise

from the Heat Pump.

VIII.

Be Careful

１１１１ . Attention

A. To set the desired temperature in order to get comfortable water temperature;

this will avoid overheating or overcooling;

B. Please don't stack objects that can block air flow near intake or outlet area,

the Heat Pump's efficiency may be reduced or even stopped;

C. Please don't put hands into the outlet of the swimming pool heater, and

don't remove the screen of the fan at any time;

D. If there are suspect conditions such as noise, smell, smoke and electrical

leakage, please switch off the machine immediately and contact the local

dealer. Don't try to repair it yourself;

E. Do not use or stock combustible gas or liquid such as thinners, paint and

fuel near the Heat Pump to avoid fire;

F. In order to optimize the heating effect, please install heat preservation

insulation on pipes between swimming pool and the heater. When the Heat

Pump is working please use a recommended cover on the swimming pool

to avoid heat loss through evaporation;

G . The Heat Pump should be placed ≤10m of the swimming pool, or the