HIKVISION DS-9108HFI-ST series Panduan Pengoperasian Cepat - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pengoperasian Cepat untuk DVR HIKVISION DS-9108HFI-ST series. HIKVISION DS-9108HFI-ST series 19 halaman. Ds-9100hfi-st series

Halaman Cetak

Quick Operation Guide of DS-9100HFI-ST Series DVR

Live View

Some icons are provided on screen in Live View mode to indicate different camera status. These icons include:

Live View Icons

In the live view mode, there are icons at the right top of the screen for each channel, showing the status of the

record and alarm in the channel, so that you can find problems as soon as possible.

Alarm (video loss, tampering, motion detection or sensor alarm).

Record (manual record, schedule record, motion detection or alarm triggered record)

Alarm & Record

PTZ Control

Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done before

you setting the PTZ camera.

Before you start, please check that the PTZ and the DVR are connected properly through RS-485 interface.

PTZ Settings

To configure PTZ settings:

1. Enter the PTZ Settings interface.

Menu >Camera> PTZ

2. Choose the camera for PTZ setting next to Camera label.

3. Enter the parameters of the PTZ camera.

Note:

All the parameters should be exactly the same as the PTZ camera parameters.

4. Click Copy if you want to configure same settings to other PTZ cameras.

5. Click the Apply button to save and exit the interface.