Lexmark 20D0000 - X 340 MFP B/W Laser Panduan Pemecahan Masalah - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pemecahan Masalah untuk Printer Lexmark 20D0000 - X 340 MFP B/W Laser. Lexmark 20D0000 - X 340 MFP B/W Laser 5 halaman. Sending a fax using the computer
Juga untuk Lexmark 20D0000 - X 340 MFP B/W Laser: Manual (2 halaman), Panduan Memulai Cepat (2 halaman), Manual Faks (4 halaman)

Halaman Cetak
Lexmark 20D0000 - X 340 MFP B/W Laser Panduan Pemecahan Masalah
oner specs
T
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
Replace the toner cartridge. For more information,
see the User's Guide.
Clean the inside of the MFP. For more information,
see the User's Guide.

Print irregularities

AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
•
Use only new, dry paper.
•
You may be able to temporarily extend the toner
cartridge life by shaking the toner cartridge. If
this does not work, install a new print cartridge.

Vertical lines

AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
•
Replace the photoconductor. For more
information, see the User's Guide.
•
You may be able to temporarily extend the toner
cartridge life by shaking the toner cartridge. If
this does not work, install a new print cartridge.
Horizontal stripes
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
Replace the toner cartridge. For more information,
see the User's Guide.

Gray background

AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
•
For copies, adjust the darkness settings by
pressing Darkness from the control panel.
•
For prints, adjust the darkness settings from the
control panel menu:
1
From the control panel, press Menu.
2
Press
or
repeatedly until MACHINE
SETUP appears.
3
Press
.
4
Press
or
repeatedly until Toner
Dark appears.
5
Press
.
6
Press
or
repeatedly to adjust the
darkness settings.
7
Press
to save the settings.
8
Press Back repeatedly to return to the
Ready prompt.
•
Replace the toner cartridge. For more
information, see the User's Guide.
Toner smear
•
Clean the inside of the MFP. For more
information, see the User's Guide.
•
Make sure that the paper type settings match
the paper in the tray.
•
Replace the toner cartridge. For more
information, see the User's Guide.

Page skew

•
Make sure the paper guides in the tray are
aligned with the edges of the paper.
•
Make sure the paper guides for the manual
feeder are aligned with the edges of the paper.

Wrinkles or creases

•
Make sure paper is loaded correctly.
•
Make sure the paper is not too wet. Keep paper
in its original wrapper and out of high humidity
areas until needed. Try paper from a freshly
opened pack.