Avanti WD363P Buku Petunjuk - Halaman 7

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Dispenser Air Avanti WD363P. Avanti WD363P 20 halaman. Avanti products water dispenser user manual

Height Adjustment Platform

To make the water dispenser faucets more accessible your unit has been supplied with a
height adjustment platform. The platform requires assembly as shown below.
Parts Provided:
1 Front Panel
1 Back Panel
1 Stability Ring (located on the top foam cover)
2 Short Screws and 2 Long Self-tapping Screws (located in the bag with instruction manual)
Remove all parts from the box and remove the packing materials.
a)
Align both the front and back panels of the platform and assemble as shown in
figure 1.
Front Panel
b) Align the assembled platform to the bottom stability ring as shown in figure 2a.
Align the areas marked "1" and "2" on the platform with same areas marked "1"
and "2" on the stability ring.
(NOTE: These areas must be aligned correctly for the unit to be assembled. If the
platform is not aligned correctly to the stability ring, the retaining clips could be
permanently damaged and cause the platform to be un-useable).
Fig. 1
Fig 2a
7
Back Panel
Bottom Ring