JAMO R 909 Panduan Pemilik - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Pembicara JAMO R 909. JAMO R 909 12 halaman. Jamo amplifier owner's manual
Juga untuk JAMO R 909: Brosur (8 halaman), Panduan Pemilik (12 halaman)

Halaman Cetak

1. Speciﬁ Cations

SP I KE S

After the initial placement of the speakers it's now time to screw in the spikes. Be-

cause of the weight of the R 909, we recommend that you gently lay it on one side

and screw in all four spikes together. Before you do this, however, be sure to place

a couple of thick towels or similar underneath the side of the speaker. This will pre-

vent accidental scratching to the surface of the R 909 and, equally importantly, will

avoid you putting a rather large dent in your ﬂ oor.

After screwing in the spikes, we recommend you ﬁ t them with the hard rubber feet

and the indented metal washers we've supplied. These will spare the ﬂ oor from

damage and allow you to gently bring the speaker to its vertical position. Once

upright simply adjust the spikes to give optimal support.

Floor surfaces vary considerably so we have given you 3 different choices when it

comes to spiking options. You can keep the hard rubber feet on the spikes, rest the

spikes on the four indented metal washers, or place the spikes directly onto the

ﬂ oor. Always choose the option that gives the most stability for your speakers in

your domestic environment.

Using the spikes without the hard rubber feet or indented metal washers will give

the very best support and sound quality. If you want to spare your ﬂ oor surface

from being punctured however, the rubber feet or indented metal washers are a

good compromise. Sonically, there's really very little difference between them - use

whichever one suits your ﬂ oor surface better.

A warning: be careful when using the spikes with the indented metal washers - you

don't want to get your ﬁ nger trapped between the two!

Whichever spiking option you choose, avoid "walking" the speakers if you need to

move them to a different position... especially on hard wood ﬂ oors!