Garden Gear G4801 Buku Petunjuk - Halaman 9

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Gergaji Garden Gear G4801. Garden Gear G4801 17 halaman. 20v cordless telescopic chainsaw

Assembling the chain bar and chain

Warning! The saw chain has very sharp edges, use thick protective

gloves for safety.

Loosen the cover nut (20), remove the SDS control system and chain

bar cover(18).

Please note that the oil sealing plate(17) must on the working head.

Position the chain bar(24) onto the working head.

Fit the saw chain (22) over the sprocket(15) and into the chain bar

groove. The cutters on the top of the chain bar should face toward the

chain bar tip, in the direction of the chain rotation. (Note: If the chain is

not properly fitted over on the sprocket, the chain saw will not work and

could cause serious injury).

Replace the chain bar cover(18) and install the SDS control system.

Tighten the cover nut(20) finger tight only. The cover nut(20) is used to

fasten the cover. The chain tightening piece A(21) is fixed to the cover

nut(20). The chain tightening piece A(21) must coordination to the

chain tightening piece B(23) which is on the chain bar(24), the chain

tightening ring is used to tightening the chain. The chain bar must be

free to move by chain tightening ring(19)

Adjust the chain tension by turning the chain tightening ring(19) until the