JAMO Amplifier AT101 Petunjuk - Halaman 3

Jelajahi secara online atau unduh pdf Petunjuk untuk Penguat JAMO Amplifier AT101. JAMO Amplifier AT101 4 halaman. Audio stereo attenuator

IMPEDANCE MATCHING

1. Identify the impedance of your speakers and the impedance

requirements of your amplifier

2. Find the tabel which matches your speakers and your amplifier

3. Set the jumbers on the AT-101's according to the table. The jum-

ber settings are determined by the AT-101 with the largest

numbers of speakers connected

AT-101 JUMBER SETTINGS

Each AT-101 in the system must have the same jumber setting when

the tables below are used

When using speakers with different impedances, consider all

speakers to be the same as the lowest impedance speaker.

Speaker impedance: 8 ohm (min)

Amplifier impedance: 8 ohm (min)

Speaker impedance: 4 ohm (min)

Amplifier impedance: 8 ohm (min)

NOTE: * = do not use

Speaker impedance: 8 ohm (min)

Amplifier impedance: 4 ohm (min)

Speaker impedance: 4 ohm (min)

Amplifier impedance: 4 ohm (min)