Empire DVCT40CFP95P-1 Panduan Pemilik Rumah - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pemilik Rumah untuk Perapian Dalam Ruangan Empire DVCT40CFP95P-1. Empire DVCT40CFP95P-1 16 halaman.
![Empire DVCT40CFP95P-1 Panduan Pemilik Rumah](/uploads/products/server2/2114056/2114056.jpg)
MULTIFUNCTION REMOTE OPERATING INSTRUCTIONS
The Thermostat Feature may be disabled if desired.
With all three AAA type batteries installed:
1.
Take out one AAA battery.
2.
While re-inserting the AAA battery, Push and hold down the
thermostat button. This will disable the thermostat feature on
the transmitter.
Room Thermostat (Transmitter Operation)
The Remote Control can operate as a room thermostat. The
thermostat can be set to a desired temperature to control the
comfort level in a room. To activate this function, press the Ther-
mostat Button (Figure 3). The LCD display on the Transmitter
will change to show that the room thermostat is "ON" and the
set temperature is now displayed. See Figure 14. To adjust the
set temperature, press the Up or Down Arrow Buttons until the
desired set temperature is displayed on the LCD screen of the
Transmitter. See Figure 15.
ROOM TEMPER ATURE
SET TEMPERATURE
Smart Thermostat (Transmitter Operation)
The Smart Thermostat function adjusts the flame height in
accordance to the difference between the set point temperature
and the actual room temperatures. As the room temperature gets
closer to the set point the Smart Function will modulate the flame
down. To activate this function, press the Thermostat Button until
the word "SMART" appears to the right of the temperature bulb
graphic. See Figure 16. To adjust the set temperature, press the
Up or Down Arrow Buttons until the desired set temperature is
displayed on the LCD screen of the Transmitter. See Figure 17.
NOTE: When Smart Thermostat is activated, manual flame
height adjustment is disabled.
Page 6
Figure 14
Figure 15
Blower Control (Fan)
If the appliance is equipped with a hot air circulating fan, the
speed of the fan can be controlled by the Proflame system. The
fan speed can be adjusted through six speeds. To activate this
function, use the Mode Button (Figure 3) to index the fan control
icon. See Figure 18. Use the Up/Down Arrow Buttons (Figure
56) to turn on off or adjust the fan speed. See Figure 19. A single
"beep" will confirm reception of the command.
OFF
OFF
Figure 16
Figure 17
Figure 18
Figure 19
37743-1-0117