Avantree Audition Procast Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Headphone Avantree Audition Procast. Avantree Audition Procast 8 halaman.

Reconnect to Bluetooth device

Normally, once powered on, the headphones will reconnect to the last connected device. If it doesn't

automatically connect, please select "Avantree AS9PA" from your device's Bluetooth menu to connect

manually. (If you're using a Bluetooth transmitter, please refer its user manual to reconnect)

Simultaneously share your audio with up to 100 other AS9PA headphones by using the built-in

broadcast function.

1. Select one AS9PA as the BROADCAST unit. The others will act as RECEIVER headphone units.

2. For BROADCAST headphone -

1) Ensure the headphone is connected to a Bluetooth device. The LED should be solid BLUE.

2) Hold

for 5 seconds to activate the Broadcast function, the LED will flash

(once every 5 seconds)

3) Press

once to ready pairing with RECEIVER headphones, the LED will flash

3. For RECEIVER headphones –

1) Switch ON the headphone.

2) Ensure the headphone is NOT connected to any device(s) via Bluetooth OR a 3.5mm audio cable.

3) Hold

for 5 seconds to activate the Broadcast function, the LED will flash WHITE slowly

(once every 5 seconds)

4) Press

once to ready pairing with BROADCAST headphone, the LED will flash WHITE rapidly.

4. Connect

Keep the BROADCAST headphone (LED flashes

rapidly) close together and wait for 5~10 seconds as they connect. Once connected, the RECEIVER headphone's

LED will turn solid WHITE. During audio or voice broadcast from the BROADCAST headphone, its LED will turn

solid

GREEN.

⋯⋯⋯⋯

GREEN

⋯⋯

rapidly) and RECEIVER headphone (LED flashes WHITE

100

GREEN

slowly

GREEN

rapidly.