Avantree Audition Procast Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Headphone Avantree Audition Procast. Avantree Audition Procast 8 halaman.

Charging

If you hear a beep sound every five minutes and the LED blinks Red, you should recharge your headphones.

Please plug it into a USB wall charger (DC 5V/0.5-2A) or a powered computer USB port via the included

micro USB cable.

Normally it will take about 3 hours to fully charge. While charging the LED will turn RED and will turn off once

charging is complete.

No sound with PC?

Under Playback Devices select the Avantree AS9PA as the default playback device

When using AS9PA to make VOIP calls from an app, please select the AS9PA Hands-Free for Microphone

and Speaker device

No sound using a Bluetooth transmitter to watch TV?

Ensure the Bluetooth transmitter and headphones are connected properly

Check that your audio OUTPUT is functioning properly

· AUX & RCA (red and white) outputs on TV – test audio with any wired headphone

· OPTICAL output on TV – set your TV audio format to "PCM/LPCM" or turn off Dolby/DTS

Change your TV audio out device setting to External speakers/Headset

Clearing paired history (Bluetooth & Broadcast)

Turn on headphones (do not activate Broadcast function), hold and together for 5 seconds until the LED

blinks

Blue

and

Red

together (looks PINK) for 2s.

To restart the headphones

If the headphones DO NOT respond, please recharge the headphones or connect the headphones with any

audio device via the 3.5 mm audio cable.