JAMO LKP4.6 Instalasi & Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Instalasi & Panduan Pengguna untuk Papan tombol JAMO LKP4.6. JAMO LKP4.6 20 halaman.

Cloning

Step 5.

◄

Press the

button on the remote until TRX is flashing.

Step 6.

Start cloning.

Press ENTER on the remote. Display shows SENDING.

Step 7.

Confirm the LKP4.6 is receiving.

RXING will be displayed to indicate it is receiving data.

After approximately 7 minutes the keypad should show

COMPLETE for a few seconds and return to normal op-

eration. If the cloning fails the keypad will show ERROR

or TIMEOUT. Wait until the remote is done sending data

before repeating the process. Make sure cloning cable is

firmly inserted. The cloning must be successful for the

keypad to exit LEARN mode. You can not exit LEARN

mode manually.

Note: See page 18 if keypad is locked in ERROR.