Avantree HT41899 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Headphone Avantree HT41899. Avantree HT41899 10 halaman. Two-headphones wireless tv set

Note:

If there is no sound playing from headphone, please set the Sound Out / Speaker setting on your TV to

"External Speaker".

Ensure use TV Red/White ports labeled " AUDIO OUT ", other Red/White ports are incorrect.

If your Receiver has 6.35mm phone jack at front

Micro USB power cable

Please do NOT use the RED/WHITE ports on the back of your AV receiver, they may permanently damage

the transmitter.

Please ONLY use the BIG 6.35MM PHONE OUT on front side of your AV Receiver with the 6.35mm to 3.5mm

adapter.

Plug any wired headphone into the converter plug, lower the volume on the Receiver for safety precautions,

and test to see if there is audio coming through to your headphone.

Lowering the volume before hand is a safety measure to prevent damaging your ears.

The HT41899 transmitter supports Micro USB digital audio input from your PC/Laptop. This delivers much

better audio quality compared to plugging it into the standard 3.5mm AUX analog port.

Connect the transmitter to PC/laptop via the included GRAY Micro USB data charging cable.

Note: The connecting cable must have both DATA SYNC and charging capabilities.

After turning on HT41899 and connecting cables as above, you should be able to hear sound from your

headphones; If not:

• Set as default "Playback device" on PC/laptop - Right-click the speaker icon in the bottom-right of the

taskbar and select "Playback devices".

• Set the "Avantree Audikast Plus" as the "Default Device".

PHONES

Micro USB data charging cable

PHONES

6.35mm to

3.5mm Converter

(purchase

3.5mm audio cable

separately)