Avantree TC026 Panduan Pengguna

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemancar Avantree TC026. Avantree TC026 1 halaman. Wireless transmitter receiver 2-in-1 adapter

Halaman Cetak

Contents

For a Better Experience

1. Product Overview

2. As a Bluetooth Transmitter

2.1. Bluetooth Pairing & Connection

2.2. Connect to two Bluetooth headphones/speakers simultaneously

User Manual

2.3. Connect TC026 to TV or other audio source

3. As a Bluetooth Receiver

Wireless Transmitter Receiver 2-in-1 Adapter

.1. Bluetooth Pairing & Connection

TC026

3.2. Connect to two phones/tablets simultaneously

4. LED Indications

5. Charging

6. Important Notices & FAQ

7. Product Specifications

www.avantree.com

2.2. Connect to two Bluetooth headphones/speakers simultaneously

2.3. Connect TC026 to TV or other audio source

Step 1. Connect to your first device as above. Then turn off the first device and

Connect TC026 to your TV or other analog audio source via 3.5mm audio cable. Then

TC026.

TC026 is ready for use now.

Step 2. Set second device to PAIRING MODE.

Step 3. Set TC026 to PAIRING MODE again – Turn on, then double click MFB. The

LED flashes BLUE very quickly.

Step 4. Keep the devices close and wait for 5~30 seconds. Once connected, the LED

on TC026 will stay BLUE. Then turn off TC026 again.

Step 5. Turn on the first device and TC026 again, wait for 5~30 seconds, TC026 will

automatically connect to two devices.

TC026

Note: If no sound from headphones after connection, please use a wired earphones

to test if you can heard the sound from the audio jack on TV or audio source.

Note: If TC026 can't re-connect to two devices, please try to turn it off and on again.

- 4 -

5. Charging

6. Important Notices & FAQ

When the LED flashes RED, you should recharge the device. It normally takes

1). AptX Low Latency

about 2 hours to fully charge the battery. The LED will stay RED when charging and

TC026 just support aptX low latency in TX mode. In this mode, if you still experiencing

will turn off when charging is complete.

audio delay, it is most likely due to your headphones/receiver without Low Latency

Support.

Charging Requirement

You can connect TC026 via the supplied micro USB cable to your own USB

Due to aptX technology limitation, aptX Low Latency codec does NOT support under

chargers (wall charger/travel charger/car charger, etc.) with 5V/500mA-1A or PC

dual link.

USB port. It's ok to use most mobile phone chargers on the market.

2). Reconnect

Once powered on, TC026 will reconnect with the last connected device automatically

within 5 seconds. If not, you may press MFB once to stimulate the process.

3). Auto power off

Once disconnected over 5 minutes, TC0026 will automatically power itself off.

Micro USB cable

4).How to erase the previous pairing history?

Charge from a wall charger

Charge from PC

Step 1. Turn Off TC026.

Note: We suggest you fully charge the device at least every two months.

Step 2. After 3 seconds, slide the TX/RX switch to other side. Then power on.

- 9 -

For a Better Experience

www.avantree.com

[email protected]

Z-PKMN-TC026-V1

1. Product Overview

LED indicator

Volume +

Volume -

Multi-function button(MFB)

What's in the box?

A. Avantree TC026 adapter

B. 1 pc 3.5mm audio cable

C. 1 pc micro USB charging cable

D. User manual & Quick user guide

3. As a Bluetooth Receiver

3.1. Bluetooth Pairing & Connection

Step 1. From off, slide TX/RX switch to RX position.

Step 2. Turn on TC026 – press and hold MFB button for 3 seconds.

Step 3. Enter PAIRING MODE – double click MFB, the LED flashes BLUE and RED

alternately.

Step 4. Activate Bluetooth on your phone/tablet, search & select "Avantree TC026"

to connect. Once connected, the LED on TC026 will stay BLUE.

Set

Receiver

Mode

3.5 mm

audio cable

From OFF mode, set switch to "RX" side

Turn on, then double click MFB.

LED ﬂashes

BLUE

Step 5. Connect TC026 to your wired headphone/speaker system via 3.5mm audio

cable. Then you can wireless streaming music now.

- 5 -

5). What is the PIN code?

If a PIN code is required for pairing, try 0000 (four zeroes), 8888 (four eights), 1111

(four ones), or 1234.

6). Can I use TC026 while charging?

Yes, you can. But it will automatically turn itself off when charging. Please turn

TC026 on again, it will automatically reconnect to the last device.

Note: The USB outputs of some TVs or laptops are unstable. When used while

charging, we suggest you connect to a wall charger instead of a USB port.

More video user guide for TC026 on Youtube.com

Telephone support: booking from Avantree.com

More FAQs and instructions on support.avantree.com

Email support: [email protected]

- 10 -

Basic operation

Button

Function

Operation

Power on/off

Hold MFB for 3 seconds to turn TC026 on/off

After turn on, double click MFB, LED indicator

Enter pairing mode

will flashes BLUE and RED alternately in RX

MFB

mode / flashes BLUE quickly in TX mode.

Reconnect by manual

Press MFB once

TX/RX mode switch

3.5mm

TX: Transmitter

Play/Pause

Press MFB once when music streaming in RX mode.

audio port

RX: Receiver

Switch between transmitter and receiver mode.

Micro USB charging port

TX/RX switch

* Once switch the mode, the previous pairing history will be erased *

Volume +

Volume up

Press and hold Volume +

*Just available in

Next track

Press Volume + once

RX mode*

Volume –

Volume down

Press and hold Volume -

For a Better Experience

User Manual

*Just available in

Bluetooth Transmitter Receiver 2-in-1 Adapter

TC026

Previous track

Press Volume - once

www.avantree.com

RX mode*

- 1 -

- 2 -

3.2. Connect to two phones/tablets simultaneously

Step 1. Connect the first phone as above.

Step 2. Set TC026 to PAIRING MODE again – double click MFB, the LED flashes

BLUE and RED alternately.

Step 3. Activate Bluetooth on your second phone/tablet, search and select

"Avantree TC026" to connect.

Step 4. Turn off TC026 and turn on again. It will automatically connect to two

devices simultaneously.

Pair

Connect

TC026

PAIRING MODE

Search & Connected

and

RED

alterately.

Avantree Saturn Pro

- 6 -

- 7 -

7. Product Specifications

• BT version: 4.1

• BT profile: A2DP, AVRCP

• Operational range: Class II, 10M

• Working time: Up to 9 hours in RX mode; Up to 10 hours in TX mode.

• Charging time: 2 hours

• Product weight: approx. 21g

• Product size: 55*38*10.5mm

- 11 -

- 12 -

2. As a Bluetooth Transmitter

2.1. Bluetooth Pairing & Connection

Step 1. From off, slide TX/RX switch to TX position. Then turn on TC026 – press

and hold MFB button for 3 seconds.

Step 2. Enter PAIRING MODE – double click MFB, the LED flashes BLUE very quickly.

Step 3. Set your Bluetooth headphones/receiver to *PAIRING MODE*

Step 4. Keep the devices close and wait for 5~30 seconds. Once connected, the

LED on TC026 will stay BLUE.

Set

Pair

Connect

Transmitter

Mode

TC026

Turn on & double

Get headset or

speaker into

click MFB, LED will

Keep close & wait 5~30s, once connected,

From OFF mode, set switch to "TX" side

PAIRING MODE*

ﬂashes

BLUE

very

LED will stay BLUE.

quickly

PAIRING MODE: Discoverable mode for Bluetooth device, normally the LED flashes

very quickly constantly or flashes two colors alternately.

- 3 -

4. LED indications

Status

LED indicator

Power on

LED flashes BLUE 2 times

Power off

LED flashes RED 2 times

LED flashes BLUE quickly in TX mode

Pairing mode

LED flashes BLUE and RED alternately in RX mode

Connected

LED stays BLUE

LED flashes BLUE once every second in TX mode

Disconnected

LED flashes BLUE 2 times every 3 seconds in RX mode

Low battery

LED flashes RED quickly

Charging

LED stays RED

Fully charged

LED turns off

- 8 -

Dispose of the packaging and

this product in accordance with

the latest provisions.

- 14 -