Lexmark 560n - X Color Laser Panduan Pemecahan Masalah - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pemecahan Masalah untuk Printer Lexmark 560n - X Color Laser. Lexmark 560n - X Color Laser 10 halaman. Setup sheet
Juga untuk Lexmark 560n - X Color Laser: Manual (13 halaman), Lembar Pengaturan (2 halaman)
Halaman Cetak
C
HECK TO SEE IF MARKS OCCUR REPEATEDLY
ONLY IN ONE COLOR AND MULTIPLE TIMES ON A
PAGE
Replace the print cartridge if the defects occur every:
•
22 mm (.87 in.)
•
25 mm (.98 in.)
•
26 mm (1.02 in.)
•
29 mm (1.14 in.)
•
75 mm (2.95 in.)
C
HECK TO SEE IF MARKS OCCUR ACROSS THE
PAGE REPEATEDLY IN ALL COLORS
Replace the transfer belt if the defects occur every:
•
28 mm (1.10 in.)
•
38 mm (1.50 in.)
•
57 mm (2.25 in.)
Replace the fuser if the defects occur every:
•
19 mm (.75 in.)
•
31 mm (1.22 in.)
•
43 mm (1.69 in.)
•
83 mm (3.27 in.)
•
94 mm (3.70 in.)
Light colored line, white line, or
incorrectly colored line
These are possible solutions. Try one or more of the following:
C
LEAN THE LASER LENS
The laser lens may be dirty.
I
S A PRINT CARTRIDGE DEFECTIVE
Replace the print cartridge causing the line.
I
S THE TRANSFER BELT DEFECTIVE
Replace the transfer belt.
I
?
S THE FUSER DEFECTIVE
Replace the fuser.
Streaked vertical lines
These are possible solutions. Try one or more of the following:
I
?
S THE TONER SMEARED
Try feeding from another tray.
I
S A PRINT CARTRIDGE DEFECTIVE
Replace the print cartridge causing the streaks.
I
S THE TRANSFER BELT DEFECTIVE
Replace the transfer belt.
Print is too light
These are possible solutions. Try one or more of the following:
?
M
AKE SURE THE
NOT TOO LIGHT
From Print Properties, adjust the Brightness setting before
?
sending the job to print.
Note: This solution applies to Windows users only.
C
HECK THE
From Print Properties, make sure the Paper Type setting
matches the paper loaded in the tray.
I
S THE TONER LOW
When Replace <color> Print Cartridge Soon
appears or when the print becomes faded, you may be able to
extend the life of the print cartridge:
1
Remove the specified print cartridge.
2
Firmly shake the cartridge side-to-side and front-to-back
several times to redistribute toner.
3
Reinsert the print cartridge and continue printing.
I
S A PRINT CARTRIDGE DEFECTIVE
Replace the print cartridge.
Print irregularities
?
?
These are possible solutions. Try one or more of the following:
I
O
MAGE
PTIONS SETTINGS ARE
P
T
APER
YPE SETTING
?
?