Jandy SFTM PRO Series Data Instalasi dan Pengoperasian - Halaman 4
Jelajahi secara online atau unduh pdf Data Instalasi dan Pengoperasian untuk Sistem Penyaringan Air Jandy SFTM PRO Series. Jandy SFTM PRO Series 16 halaman.
Halaman Cetak
Page 4
SECTION 1.
Safety Information
1A. Important Safety Warning
WARNING- NEVER OPERATE THIS FILTER SYSTEM AT MORE THAN 50 PSI.
THIS FILTER OPERATES UNDER HIGH PRESSURE, WHEN ANY PART OF THE
CIRCULATING SYSTEM, i.e., FILTER, PUMP, VALVE(S), CLAMPS, ETC. IS
SERVICED, AIR CAN ENTER THE SYSTEM AND BECOME PRESSURIZED WHEN
THE SYSTEM IS STARTED. TO AVOID THIS POTENTIAL HAZARD, FOLLOW THE
INSTRUCTIONS IN THIS MANUAL.
1B. General Safety Instructions
ATTENTION INSTALLER:
This manual contains important information about the installation, operation and safe
use of this product. This information should be given to the owner/operator of this
equipment.
1. Before repositioning valve(s) and before beginning the assembly, disassembly, or any other service
of the circulating system; (A) turn the pump off and shut off any automatic controls to ensure the
system is not inadvertently started during servicing; (B) open the pressure release valve; (C) wait
until all pressure is relieved.
2. Once service on the circulating system is complete follow the steps in the"Start-Up and
Operation" section of this manual.
3. Maintain circulation system properly. Replace worn or damaged parts immediately.
4. Be sure that the filter is properly mounted and positioned according to these instructions.
5. SAVE THESE INSTRUCTIONS.