HIKVISION 1006KI Buku Petunjuk - Halaman 2
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Perangkat Keras Jaringan HIKVISION 1006KI. HIKVISION 1006KI 9 halaman. 485 control back-end gui4.0
Juga untuk HIKVISION 1006KI: Bagaimana cara menggunakan (5 halaman)
Halaman Cetak
How to use 1200KI & 1006KI 485 control back-end GUI4.0
This document is intended to introduce the method of how to use 1200KI & 1006KI 485
control back-end GUI4.0 (NVR version 4.21.000 is recommended). We will start from hardware
connection
1. Connect keyboard RS-485 to back-end KB interfaces, T+ to D+, T- to D- through twisted pair.
Note only back-end with KB interface on rear panel could be controlled by 485 keyboard
(485 interface on NVR/DVR is for backend to control analog PTZ)
2. Configure Back-end Device No, this number ranges from 0-255( 0 is not recommended, it
mean control all), you can configure on backend GUI or web interface
3. Login keyboard, use FOCUS+/A button to switch between number, capital and lower case
letters. (You can choose remember password on your next login)
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
1
How to use 485 control back-end GUI4.0