Avastor XD5 Panduan Pengguna - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kandang Avastor XD5. Avastor XD5 19 halaman. Desktop raid

RAID Rebuild with No Spare Drive

Should a drive fail or become degraded, the XD5 alarm will sound

beep and the LED of the faulty drive will flash red.

Power the XD5 off and remove the faulty drive.

Install a known good drive into the same drive slot from which the

faulty drive was removed.

NOTE: The new drive must be equal to or larger than the largest

drive in the array. The new drive does not need to be formatted.

The new drive should be erased; any data on the new drive will be

lost when rebuild begins.

The RAID array will start rebuilding as soon as the XD5 is powered

on.

The rebuild is complete when the new drive stops flashing red and

turns blue.

LED INDICATORS

Disk Not Detected

Disk Detected/Power On

Data Access

Disk Failure

Disk Rebuild

Indicators

Source Disk

Rebuild Disk

Color

Off

Blue

Flashing Blue

Flashing Red

Flashing Blue

Flashing Red

VER 1.0