HIKVISION DS-3WF02C-5N/O Panduan Memulai Cepat - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Perangkat Keras Jaringan HIKVISION DS-3WF02C-5N/O. HIKVISION DS-3WF02C-5N/O 16 halaman.
Halaman Cetak
Indicator
LAN
WLAN
Physical Interface
The hardware interfaces of the DS-3WF02C-5N/O are as follows.
Physical Interface
LAN
Reset
POE
DS-3WF02C-5N/O Quick Start Guide
Table 1-2 Indicator Description
Description
Power indicator.
If the green light is steady on, it indicates that the power is on.
Network connection light.
The light indicates there is one IPC or other network device
connects to the LAN port of PoE adapter.
Blinking means sending data.
Wireless indicator light.
The light indicates that the wireless is enabled.
Blinking means sending data.
Signal strength indicator light.
Red light on, indicating that the signal is weak or no signal.
Yellow and red lights on, indicating signal level is medium.
Green, yellow and red lights on, indicating the wireless signal
level is strong
Figure 1-3 Physical Interface
Table 1-3 Physical Interface
Description
The reserved network port can be connected to front-end
network devices such as IPC.
Used to restore the default factory settings.
The network cable is connected to the "POE" on the PoE
power module to provide power and data transmission to the
device.
7