Lexmark 840dn - W B/W Laser Printer Manual Koneksi - Halaman 10
Jelajahi secara online atau unduh pdf Manual Koneksi untuk Printer Lexmark 840dn - W B/W Laser Printer. Lexmark 840dn - W B/W Laser Printer 19 halaman. Troubleshooting guide
Juga untuk Lexmark 840dn - W B/W Laser Printer: Pengaturan (4 halaman), Panduan Pemecahan Masalah (6 halaman)
Halaman Cetak
6 Squeeze the side guide tab, and slide the guide until it lightly rests against the edge of the paper.
7 Insert the tray into the printer.
For loading other sources, see "For more information" on page 4.
Setting the Paper Type and Paper Size
After setting the Paper Type and Paper Size to the correct values for the type and size used in the trays, then any
trays containing the same size and type are automatically linked by the printer.
Note: If the size of the media you are loading is the same size of the media previously loaded, do not
change the Paper Size setting.
To change the Paper Size and Paper Type setting:
1 Make sure the printer is on and the Ready message appears.
2 Press
until
appears beside Paper Menu, and then press .
3 Press
until
appears beside Paper Type (or Paper Size), and then press
4 Press
until
appears beside Tray x Type (or Tray x Size), and then press
5 Press
to scroll through a list of possible paper types (or sizes) to locate the correct type or size. Make
sure the type or size is highlighted with
as the new user default type or size setting.
The message Submitting Selection appears. The printer returns to the Ready state.
beside it, and then press then press
Printing guide
Page 3 of 4
.
.
. This saves this setting