Avatar Technologies VS-441S Panduan Pengoperasian - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Beralih Avatar Technologies VS-441S. Avatar Technologies VS-441S 9 halaman. Hdmi 4x1 quad multi-viewer with seamless switcher

Halaman Cetak

4 CAT5E/6:Connect the CAT input of the receiver with the CAT output of the

transmitter with CAT5E/6 cable.

5 HDMI OUT: This slot is to connect the HDMI input port of your display such as

an HDTV.

6 LOCK LED: This LED will illuminate when the HDMI signal from the

transmitter is stable.

7 Power LED: This LED will illuminate when the device is connected with power

supply.

8 Coaxial out: This slot is where you connect to the audio amplifier with coaxial

cable.

9 ARC : Switch the ARC switcher will open or close the ARC fuction.

ARC fuciton : If you need use ARC,your HDTV must support this function,

When you open the ARC fuciton,the coaxial of the receiver will output the

HDTV current display content audio signal. Otherwise will output the HDMI

source(DVD,set-top-box ,etc) audio signal.

5.5 Connect and Operate

Connect the signal sources such as Blu-Ray Player, Play Station 3, audio/video

receiver, satellite receivers and computers equipped with HDMI output interfaces

with a short high-speed HDMI cable to the HDMI Switcher inputs.

Connect the HDMI output of the HDMI Switcher to a high-definition display

device such as HD-LCD, HD-DLP and HD projectors with HDMI input

interfaces. Use high-speed HDMI cables that are recommended for the distances

that are required for each connection.

The Switcher is powered by an external power supply which is included. Connect

power first to the source, then to the Switcher and then to HD TV or projector.

The input source can be controlled from the display. This is accomplished by

using an optional IR Receiver pigtail pointing away from the display(s), which

can be connected with an optional HDMI IR Adapter , and inserted between

HDMI cable connector and display with the toggle switcher at the "IR" position.

The IR Transmitter pigtail is used to connected to the switcher and pointed to the

source(s). The switcher also have a capability of being controlled via Remote

control.

5.6 Wideband IR(30KHz---60KHz) introduction