Avaya 1100 Series Panduan Pengguna Perangkat Lunak - Halaman 15
Jelajahi secara online atau unduh pdf Panduan Pengguna Perangkat Lunak untuk Telepon IP Avaya 1100 Series. Avaya 1100 Series 20 halaman. Expansion module for sip
Halaman Cetak
1. Press the tilt lever to adjust the stand angle on the IP Deskphone.
You can adjust the stand angle to maximum, instead of removing the
stand. See
Figure
Figure 2: Adjusting the stand angle on the IP Deskphone
Accessory Expansion Module (AEM) Port
Wheel
Clamp
2. At the back of the IP Deskphone, remove the rubber plug from the
AEM port. Place the connecting arm of the Expansion Module behind
the IP Deskphone and align the Expansion Module connection plug to
the AEM port on the back of the IP Deskphone.
3.
Insert the screws in to the top and bottom holes of the connecting arm of the
Expansion Module and tighten until snug. See
2.
Setup and assembly
Tilt
Lever
Figure 3 on page 16
.
15