HIKVISION DS-7608NI-I2/8P Panduan Memulai Cepat - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Perangkat Keras Jaringan HIKVISION DS-7608NI-I2/8P. HIKVISION DS-7608NI-I2/8P 17 halaman.
Halaman Cetak
F R O N T P A N E L ( c o n t i n u e d )
No.
Item
1.
Power Switch
2.
HDD
3.
TX/RX
4.
USB Ports
R E A R P A N E L
No.
Item
1
Audio In
2
Alarm I/O
3
Alarm I/O Legend
4
LAN
5
Grounding Screw
6
Power Input
7
Power Switch
8
Network Interfaces w/PoE
9
Audio Out
10
VGA Out
11
HDMI Out
12
USB
1
C O N N E C T D E V I C E S
1.
Connect AC power cord to the NVR.
2.
Connect NVR to LAN using Cat 5e cable.
3.
Connect video monitor(s) to NVR using HDMI and/or VGA cables, as appropriate.
4.
Connect mouse to USB port (wireless mouse can be used in lieu of included mouse).
5.
Connect to audio I/O using RCA connectors.
2
S T A R T T H E N V R
1.
Plug AC power cord into 110 to 240 VAC outlet (surge suppressor is recommended).
2.
Turn power switch on. Power indicator LED will turn
3.
After startup, power indicator LED will remain GREEN.
Description
Turns unit on/off. Power:
BLINKS RED
when data is being read from or written to HDD
GREEN
when connected to network,
traffic
Connects USB mouse or USB flash memory devices
Figure 2, DS-7616NI-I2/16P Rear Panel
Description
RCA connectors
Alarm input/output connectors
Alarm I/O labels
Connector for LAN (Local Area Network)
Ground
(WARNING: needs to be connected when NVR starts up)
100 to 240 VAC
Switch for turning device on/off
IP camera inputs and PoE outputs (DS-7608NI-I2/8P has eight PoE ports)
RCA connectors
DB-15 connector for VGA output (display local video output and menu)
HDMI video output connector
USB 3.0 port for additional devices
GREEN
when system has power and is turned on.
BLINKS GREEN
GREEN
to indicate unit is starting.
when there is network